Home

3 to 8 decoder applications

3-8 Sold Direct - 3-

3 to 8 line decoder IC 74HC238 is used as a decoder/ demultiplexer. 3 to 8 line decoder demultiplexer is a combinational circuit that can be used as both a decoder and a demultiplexer. IC 74HC238 decodes three binary address inputs (A0, A1, A2) into eight outputs (Y0 to Y7) 3 to 8 Decoder. This type of decoder is called as the 3 line to 8 line decoder because they have 3 inputs and 8 outputs. To decode the combination of the three and eight, we required eight logical gates and to design this type of decoders we have to consider that we required active high output This type of decoders is available in IC forms so that 3 to 8, 4 to 16, and 5 to 32 decoders can also be made depends on the application requirement. Back to top. 3-to-8 Decoder. In a 3-to-8 decoder, three inputs are decoded into eight outputs. It has three inputs as A, B, and C and eight output from Y0 through Y7. Based on the combinations of the three inputs, only one of the eight outputs is selected. The figure below shows the truth table of a 3-to-8 decoder

3 to 8 Line Decoder : Designing Steps & Its Application

74LS138 is a complex TTL based logical device used to convert 3-bit binary data to 8-bits. The actual purpose of this chip is designed for demultiplexing or in machine language we can say as a decoding device. The device takes 3 input data and converts it to 8-bit data. This chip is high used in decoding in memory to minimize the effect of decoding 'n' to 2^n decoders (eg. 2 to 4, 4 to 16, 3 to 8 etc) basically output all possible minterms obtained from the 'n' inputs. Decoder is widely used in many applications. Some ex are data demultiplexing , seven segment displays, and memory address decoding etc In digital electronics, a binary decoder is a combinational logic circuit that converts binary information from the n coded inputs to a maximum of 2 n unique outputs. They are used in a wide variety of applications, including data multiplexing and data demultiplexing, seven segment displays, and as address decoders for memory and port-mapped I/O 3 to 8 Decoder. A 3 to 8 decoder has three inputs (A,B,C) and eight outputs (DO to D7). Based on the 3 inputs one of the eight outputs is selected. The truth table for 3 to 8 decoder is shown in table (1). From the truth table, it is seen that only one of eight outputs (DO to D7) is selected based on three select inputs Requirednumberof3to8decoders = 16 8 = 2 Therefore, we require two 3 to 8 decoders for implementing one 4 to 16 decoder. The block diagram of 4 to 16 decoder using 3 to 8 decoders is shown in the following figure. The parallel inputs A 2, A 1 & A 0 are applied to each 3 to 8 decoder

3:8 Decoders: There are also some higher order Decoders like the 3:8 Decoder and the 4:16 Decoder which is more commonly used. These Decoders are often used in IC packages to complexity of the circuit. It is also very common to combine lower order decoders like the 2:4 Decoders to form a higher order Decoder 74LS138 is a member from '74xx'family of TTL logic gates. The chip is designed for decoding or de-multiplexing applications and comes with 3 inputs to 8 output setup. The design is also made for the chip to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times The reduction in power consumption for the computing devices requires the basic fundamental circuits to be realized with low power consuming technologies. This work mainly describes the design and implementation issues of one of the basic computing circuits, a 3:8 decoder, using single electron threshold logic In this project, we will show how to connect an 74HC238 3-to-8 decoder/demultiplexer to an arduino micrcocontroller. Using this decoder/demultiplexer, we can control 8 outputs with just 3 pins. This is the reason decoder/demultiplexer chips are great additions to microcontrollers Decoders may also be used in computer systems for address decoding. Fig. 4.4.14 illustrates a typical application where a 74HC138 3-to-8-line decoder is used to enable the microprocessor to communicate with many locations in its memor

Combine two or more small decoders with enable inputs to form a larger decoder e.g. 3-to-8-line decoder constructed from two 2-to-4-line decoders. Decoder with enable input can function as demultiplexer. 3:8 decoder It uses all AND gates, and therefore, the outputs are active- high A 3 line to 8 decoder has 8 outputs and 3 inputs. Depending on what binary number you put on the input that number output goes low. So if you had all the inputs low then output number 0 will go low with all the other outputs high. If all inputs are high then output number 7 would go low with all the other outputs high

Different Types of Encoder and Decoder and Its Application

Types of Binary Decoders,Applications - Electronics Hu

The multiplexer used for digital applications, also called digital multiplexer, is a circuit with many input but only one output. By applying control signals (also known as Select Signals), we can steer any input to the output. Some of the common types of multiplexer are 2-to-1, 4-to-1, 8-to-1, 16-to-1 multiplexer You can make a 3 to 8 decoder circuit using only a single IC which is already available in the market. But for understanding the basics of 3 to 8 decoder circuit, how a 3 to 8 decoder circuits work, these circuits which shown below are very important. The below circuits are made by the basic logic gates i.e. AND Gate, NOT Gate, OR gate But Did You Check eBay? Find 3 To 8 Decoder On eBay. Check Out 3 To 8 Decoder On eBay. Find It On eBay Decoders are important logic blocks that find a wide variety of applications in the design of digital systems. Input: (log 2 n) Output: n bits (exactly one output pins is 1, rest of the pins are 0) Example: 3-8 decoder Input: 3 bits representing a binary input number Output: 1 bit corresponding to the value of the binary input number is set to G2A or G2B is held High decoding function is inhibited and all the 8 outputs go low. Three enable inputs are provided to ease cascade connection and application of this address decoder in memory systems. All inputs are equipped with protection circuits against static discharge and transient excess voltage. M74HC238 3 TO 8 LINE DECODER

Low-Voltage CMOS 3-to-8 Decoder/Demultiplexer With 5 V−Tolerant Inputs The MC74LCX138 is a high performance, 3−to−8 decoder/demultiplexer operating from a 2.3 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance #WBCHSE#ModernComputerApplication#3×8DecoderFor 2×4 Decoder Click on below linkhttps:. Meet URL Decode and Encode, a simple online tool that does exactly what it says: decodes from URL-encoding as well as encodes into it quickly and easily. URL-encode your data without hassles or decode it into a human-readable format 8 to 3 bit priority encoder priority encoders are available in standard ic form and the ttl 74ls148 is an 8 to 3 bit priority encoder which has eight active low logic 0 inputs and provides a 3 bit. In this article we are going to discuss encoder and decoder briefly with logic diagram and truth table 1-of-8 Decoder/ Demultiplexer High−Performance Silicon−Gate CMOS 3 2 1 8 7 6 A0 CS2 A2 A1 Y7 CS1 CS3 GND Y3 Y2 Y1 Y0 VCC Y5 Y4 Y6 Figure 2. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable

74138 DECODER PDF

3 to 8 Line Decoder using AND Gates. For a specific input combination, a single output line goes 1 and all other outputs become 0. Schematic diagram of 3 to 8 Line Decoder using AND Gates is given below right after truth table. Truth Table. The truth table of 3 to 8 line decoder using AND gate is given below Encoder and decoder applications. The radio frequency spectrum is filled with noise and other signals, especially those frequencies where unlicensed transmitter operation under FCC part 15 rules is allowed. When using a wireless remote control system it is desirable to have a way of filtering out or ignoring those unwanted signals to prevent. Simple 3-8 Decoder / Demultiplexer Tutorial: This guide is intended for people new to electronics (like myself) who wants to understand how 238 decoders (demultiplexers) work. These are often used in LED-cube projects and hopefully this simple exercise will illustrate how they work. as far a

Decoders - Types & Applications Electricalvoic

Encoder in Digital Logic. An Encoder is a combinational circuit that performs the reverse operation of Decoder.It has maximum of 2^n input lines and 'n' output lines, hence it encodes the information from 2^n inputs into an n-bit code. It will produce a binary code equivalent to the input, which is active High DM74ALS138 3 to 8 Line Decoder/Demultiplexer DM74ALS138 3 to 8 Line Decoder/Demultiplexer General Description These Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these decoders can be used to. Decode each line separately (useful for when you have multiple entries). Live mode OFF Decodes in real-time as you type or paste (supports only the UTF-8 character set). DECODE Decodes your data into the area below View Lab Report - Lab_2__3-to-8 Decoder.docx from EE 301 at California State University, Long Beach. Lab 2: 3-to-8 Binary Decoder VHDL Design simulated and implemented on a Xilinx FPGA Developmen About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators.

74LS138 IC: Pin Diagram, Circuit and Application

Mar 3, 2021: E: four logic functions with Decoders problems: Homework Help: 1: Mar 24, 2019: T: I'm stuck on 2 3:8 decoders. Homework Help: 2: May 17, 2018: M: I need to condense my 2 3-8 decoders, but i cannot figure out why. Homework Help: 9: May 16, 2018: P: Suggest any projects which can be made by using only decoders,encoders,multiplexers. 1-of-8 decoder/ demultiplexer low power schottky j suffix ceramic case 620-09 n suffix plastic case 648-08 16 1 16 1 ordering information sn54lsxxxj ceramic sn74lsxxxn plastic sn74lsxxxd soic 16 1 d suffix soic case 751b-03 logic symbol vcc = pin 16 gnd = pin 8 15 14 13 12 11 10 9 12 3 456 123 a0 a1 a2 e o0o1o2o3 o4o5 o6o7 Product Overview. The SN74AHC138PWR is a 3-to-8 Decoder/Demultiplexer designed for high-performance memory-decoding and data-routing applications that require very short propagation-delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories. The SN74AHC138PWR is a 3-to-8 Decoder/Demultiplexer designed for high-performance memory-decoding and data-routing applications that require very short propagation-delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding

3 to 8 Line Decoder PLC Ladder Diagram InstrumentationTool

Question: Discussion 1- What Are The Applications Of Decoder? 2- Using 3:8 Decoder And Associated Logic, Implement A Full Adder? 3- For N-2 Decoder How Many 1/p Lines & How Many O/p Lines? This problem has been solved! See the answer. Show transcribed image text. Expert Answer Prerequisite - Encoder, Decoders Binary code of N digits can be used to store 2 N distinct elements of coded information. This is what encoders and decoders are used for. Encoders convert 2 N lines of input into a code of N bits and Decoders decode the N bits into 2 N lines.. 1. Encoders - An encoder is a combinational circuit that converts binary information in the form of a 2 N input. Best Apps To Learn Morse Code. 1. Morse Code. If you are completely new to Morse code, then this app is perfect for you. It is a Morse code translator. Here you can input any alphabets or words and it will convert them into Morse code for you, and vice versa. You can also see the list of alphabets and their Morse code

Encoders and Decoders : Types and Its Application

  1. An alternate circuit for the 2-to-4 line decoder is: Replacing the 1-to-2 Decoders with their circuits will show that both circuits are equivalent. In a similar fashion a 3-to-8 line decoder can be made from a 1-to-2 line decoder and a 2-to-4 line decoder, and a 4-to-16 line decoder can be made from two 2-to-4 line decoders
  2. imize effects of system decoding
  3. Figure 6: Implementation of a 3-to-8 decoder without enable Decoder Expansion o It is possible to build larger decoders using two or more smaller ones. o For example, a 6-to-64 decoder can be designed with four 4-to-16 decoders and one 2-to-4 line decoder. Example: Construct a 3-to-8 decoder using two 2-to-4 deocders with enable inputs
  4. 3.3 Speex Decoder Library In this application note the Speex decoder is implemented to support narrowband (8 kHz), wideband (16 kHz) and ultra-wideband (32 kHz) voices at various bitrates with different compression ratios. Five projects are included to support different Speex modes on EFM32GG with an aim of reducing memor

Decoder, 3 to 8 Decoder Block Diagram, Truth Table, and

74LS48 is a BCD to seven segments decoder that is used to display numbers decoded in binary coded decimal format. The 7-Segment is a small seven LED-based device use to represent a single numeric value from 0 to 9. Each 7-Segment has seven input pins to light up a single led in the seven segments Distributor of choice for any industry. 500,000 Products in Stock. Next Day Delivery. Great Selection of Decoders at Unbeatable Prices. Start Saving Today 8 Input 3 Output Encoders, Decoders, Multiplexers & Demultiplexers are available at Mouser Electronics. Mouser offers inventory, pricing, & datasheets for 8 Input 3 Output Encoders, Decoders, Multiplexers & Demultiplexers

74LS138 - 3 TO 8 LINE DECODER IC - Microcontrollers La

Encoding Decoding Free is an application that allows you to encode and decode any type of file. Encoding decoding can be used to hide all the sensitive and important data from prying eyes Since I am using two 3-8 decoders to develop a 4-to-16 decoder, I want to use 4 inputs out of the two 3-8 decoders. So I'll use all three of the first and the first of the second, and connect the last two inputs to ground, since they won't be used. Any pointers on where to go from here are appreciated

30F123 Datasheet PDF - 300V, 200A - IGBT for PDF TV

morse code decoders category is a curation of 29 web resources on , RSCW, EhoCW, CW Decoder Logic. Resources listed under Morse Code category belongs to Software main collection, and get reviewed and rated by amateur radio operators The decoder, , is used to train the autoencoder end-to-end, but in practical applications, we often care more about the encoder and the codings. To highlight important properties, one can, for example, constrain the latent space to be smaller than the dimension of the inputs. In this case, our model is an Undercomplete Autoencoders Similarly, a 3-bit binary code applied to inputs A, B, and C is decoded in octal at outputs 0-7. A high level signal at the D input inhibits octal decoding and causes outputs 0-7 to go LOW. All inputs are protected against static discharge damage by diode clamps to V DD and V SS Caesar cipher is also known as Shift Cipher. This shifting property can be hidden in the name of Caesar variants, eg.: CD code, C = D, the shift is 1. Jail (JL) code, J = L, the shift is 2. Ellen (LN) code, L = N, the shift is 2. Cutie (QT) code, Q = T, the shift is 3. Eiffel (FL) code, F = L, the shift is 6. WC code, W = C, the shift is 6

About. Meet Base64 Decode and Encode, a simple online tool that does exactly what it says: decodes from Base64 encoding as well as encodes into it quickly and easily. Base64 encode your data without hassles or decode it into a human-readable format. Base64 encoding schemes are commonly used when there is a need to encode binary data, especially. with an 8 or 16-way switch, select the DiSEqC 1.1 command menu. The 8 positions are usually 1 to 8. As mentioned above, with any version of DiSEqC, the ports are usually numbered. Let's take the 4-way DiSEqC as our example. The ports are numbered 1,2,3,4(please take note of this numbers because it must correspond with that of your decoder. Base64 decode Decode base64 string from 'YmFzZTY0IGRlY29kZXI=' to 'base64 decoder' CHARSET (OPTIONAL) UTF-8 ASCII Windows-1252 CP1256 ISO-8859-1 ISO-8859-2 ISO-8859-6 ISO-8859-1 Question 3 Having learned how to build simple encoder circuits using diode networks, you set out to form your own encoder manufacturing company: Encoders, Inc

What are the applications of decoders? - Quor

74LS148 8 To 3 Line Priority Encoder IC - Datasheet. The 74LS148 IC has a wide range of working voltage, a wide range of working conditions, and directly interfaces with CMOS, NMOS, and TTL. The output of the IC always comes in TTL which makes it easy to work with other TTL devices and microcontrollers Digital Design with CPLD Applications and VHDL (2nd Edition) Edit edition Solutions for Chapter 6 Problem 9P: a. Create a VHDL file for a 3-line-to-8-line decoder with the same output and enable characteristics as a 74138 decoder.b 3. Construct the circuit as shown in Fig. (3), set data switches as shown in the four to two line encoder truth table. Record the output indications of L 1 & L 2. Discussion 1. Design a full adder circuit using decoder. 2. Design 3 × 8 decoder from 2 × 4 decoder. 3. Design 4 × 16 decoder from 3 × 8 decoder. 4. Design octal to binary encoder On the other hand, as many languages have their own 8-bit code page, handling all these different 8-bit code pages would be a quite cumbersome thing to do. Some languages do not even fit into an 8-bit code page (e.g. Chinese). Therefore, RFC 3629 proposes to use the UTF-8 character encoding table for non-ASCII characters

stream. For this reason, some 8-bit inputs have two valid 10-bit codes, depending on the input disparity. The Altera 8B10B Encoder/Decoder is a compact, high performance MegaCore function capable of encoding and decoding in multi-gigabit applications. Cyclone IV E Full Cyclone IV GX Full HardCopy® II Full HardCopy III Preliminary HardCopy IV E. Wired Mobile Decoder Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp Complete Train Control Run Your Trains, Not Your Track! 014 Digitrax, Inc. — 2 — www.digitrax.com Parts List 1 DN136D Mobile Decoder 1 Instruction Shee

Hi All, welcome to my blog Introduction to Encoder-Decoder Models — ELI5 Way.My name is Niranjan Kumar and I'm a Senior Consultant Data Science at Allstate India.. In this article, we will discuss the basic concepts of Encoder-Decoder models and it's applications in some of the tasks like language modeling, image captioning, text entailment, and machine transliteration The 4511 BCD to 7 segment display decoder circuit we will build is shown below. First, to power the 4511 chip, we connect V DD, pin 16, to +5V and V SS, pin 8, to ground. This establishes sufficient power to the 4511 chip. The LT pin, pin 3, is connected to +5V. This pin would turn on all the outputs if connected LOW BCD to 7-Segment Decoder c/w 4-bit Latch. if we wished to do so... In the above non-multiplexed application, 2 Quad Displays requires 4 data + 8 strobes = 12 outputs 3 Quad Displays requires 4 data + 12 strobes = 16 outputs 4 Quad Displays requires 4 data + 16 strobes = 20 outputs The first decoder algorithm is a linear least squares (LSQ) decoder (Crosse, Di Liberto, Bednar, & Lalor, 2016) and the second a DNN-classifier (Ciccarelli et al., 2019). The DNN based decoder worked well at and above − 10 dB SNR, an encouraging finding for use in extreme noise environments. 1 The LSQ decoder on the other hand, showed a more gradual decline in performance as the SNR decreased

Binary decoder - Wikipedi

Unicode Primer¶. CPython 2.x supports two types of strings for working with text data. Old-style str instances use a single 8-bit byte to represent each character of the string using its ASCII code. In contrast, unicode strings are managed internally as a sequence of Unicode code points.The code point values are saved as a sequence of 2 or 4 bytes each, depending on the options given when. DStv Mobile Decoder 1.3.40 add to watchlist send us an update. 1 screenshot: runs on: Windows 10 32/64 bit Windows 8 32/64 bit Windows 7 32/64 bit Windows Vista 32/64 bi

SN54147, SN54148, SN54LS147, SN54LS148SN74147, SN74148 (TIM9907), SN74LS147, SN74LS14810LINE TO 4LINE AND 8LINE TO 3LINE PRIORITY ENCODERSSDLS053B − OCTOBER 1976 − REVISED MAY 20041POST OFFICE BOX 655303• DALLAS, TEXAS 75265'147, 'LS147D Encode 10-Line Decimal to 4-Line BCDD Applications Include: datasheet search, datasheets, Datasheet search site for Electronic Components and. Learn about the latest and greatest in machine learning (ML) from Google! We cover what's available to developers when it comes to creating, understanding, and deploying models for a variety of different applications. From Responsible AI to TensorFlow 2.5, mobile devices, microcontrollers, and beyond Video Processing Unit (VPU) H.264 decode (4Kp30) WMV9/VC-1 imple decode MPEG 1 and 2 decode AVS decode MPEG4.2 ASP, H.263, Sorenson Spark decode Divx 3.11 including GMC decode ON2/Google VP6/VP8 decode RealVideo 8/9/10 decode JPEG and MJPEG decode H.264 encode (1080p30) Tensilica HiFi 4 DSP for pre- and post-processing 640 MH Multimon Digital Data Protocol Decoder. Multimon is a digital baseband audio protocol decoder useful for demodulating AFSK, FSK, HAPN, ZVEI, POCSAG, and DTMF signaling commonly used in amateur and commercial radio data services. ham radio java software. phoenix os x86. mdt taxi decoder Etresoft Decoder is a drag and drop program that will decode yEnc, MIME (Base64), UUencoded, AppleSingle, MacBinary (I, II, and III), and BinHex files. Just drop the files onto the application and.

You could use a locale setting that matches encoding='UTF-8'. 2016-08-26 09:11:02.031 ERROR 31900 --- [ main] o.s.boot.SpringApplication : Application startup failed java.lang.IllegalStateException: The Java Virtual Machine has not been configured to use the desired default character encoding (UTF-8) .NET Core 3.1 downloads for Linux, macOS, and Windows. .NET is a free, cross-platform, open-source developer platform for building many different types of applications • Enable input of decoder serves as the data input for the demultiplexer 2-4 DEMUX x1 x0 y0 y1 y2 y3 D CprE 210 Lec 15 18 • The 3-to-8 decoder can be implemented using two 2-to-4 decoders with enable and one NOT gate • The implementation is as shown 3-to-8 decoder using a 2-to-4 decoder with Enable 2-4 decoder y0 y1 y2 y3 2-4 decoder y4. UTF-8 and Unicode FAQ for Unix/Linux. by Markus Kuhn. This text is a very comprehensive one-stop information resource on how you can use Unicode/UTF-8 on POSIX systems (Linux, Unix). You will find here both introductory information for every user, as well as detailed references for the experienced developer. Unicode now replaces ASCII, ISO 8859. LDPC Decoder Applications. This website gives an overview of all standards that apply LDPC codes. The standards are categorized by the organization that published the standard. 1/2, 5/8, 3/4, 13/16: Strong Partnerships for Joint Success. We are ISO 9001:2015 certified

H.265 decode (4Kp30) Video Processing Unit (VPU) H.264 decode (4Kp30) WMV9/VC-1 imple decode MPEG 1 and 2 decode AVS decode MPEG4.2 ASP, H.263, Sorenson Spark decode Divx 3.11 including GMC decode ON2/Google VP6/VP8 decode RealVideo 8/9/10 decode JPEG and MJPEG decode H.264 encode (1080p30) Tensilica HiFi 4 DSP for pre- and post-processing 640 MH 3 Hardware interface: microphone connection and acquisition The MP45DT02 MEMS microphone outputs a PDM signal, which is a high frequency (1 to 3.25 MHz) stream of 1-bit digital samples. This output is acquired in blocks of 8 samples by using a synchronous serial port (SPI or I2S) of the STM32 microcontroller 1.3. High-level Decode Process. 1.3.1. Decode Setup. Before decoding can begin, a decoder must initialize using the bitstream headers matching the stream to be decoded. Vorbis uses three header packets; all are required, in-order, by this specification. Once set up, decode may begin at any audio packet belonging to the Vorbis stream

Robodoc : IC 74138Ambi Pan HD | Noise MakersStecTrade online community Trading store | 1 stop shop in
  • Best Asia ETF 2020.
  • 10X future Technologies ZoomInfo.
  • IAS 39 vs IFRS 9.
  • Ratsit anonymt.
  • Syntetläder.
  • Gaming dator Elgiganten.
  • Yrken med hög lön.
  • Republic Protocol Price INR.
  • Create a trading bot python.
  • Bokförlag barnböcker manus.
  • Zachte beginners whisky.
  • 2Miners luck.
  • Ekeby äldreboende Eskilstuna.
  • How to buy a stock certificate.
  • Is WazirX down.
  • Avanza Authenticator.
  • Mjuka upp synonym.
  • Rörelseresultat engelska.
  • Aquarium Gardens USA.
  • Kryptos Steuern.
  • Norwegian destinations.
  • Ljusslinga 100 meter.
  • AMF fonds.
  • San Francisco quarantine for visitors.
  • Väder Sälen snödjup.
  • Termisk solenergi.
  • Tether value.
  • Ekonomie kandidat Uppsala Flashback.
  • Yobit DICE.
  • Engiven.
  • Koncernredovisning i praktiken.
  • Northcrypto.
  • The Wheel.
  • Tweedehands auto betalen particulier.
  • Nikola stock forum.
  • Björn Borg förmögenhet.
  • Local Bitcoin India.
  • Vattentryck bar.
  • NetOnNet ordernummer.
  • Federer Rolex watch.
  • Tradingskills chartadvise.